• new collection Vintage
  • Chevron collection with the Good Design Award 2018
  • Nowe Retro Collection
  • Duży katalog podłóg Jawor-Parkiet
  • Architect
  • Nowa seria Design Experience
  • FertigDeska Luxury – fenomenalnie długa deska od Jawor-Parkiet

Jawor-Parkiet impregnant for oil-waxed floors

Jawor-Parkiet impregnant for oil-waxed floors

Jawor-Parkiet impregnant for oil-waxed floors

Used for maintenance and upkeep of wooden floors finished with oil, UV oil, UV oil-wax.

The maintenance oil is intended for maintenance and regeneration of wooden oil-waxed floors. Dulled and damaged floor coatings can be refreshed with maintenance oil. Regular use helps avoid sanding and renovation works in the future.

Use:

Ideal for all wooden oil-waxed floors (solid wood with different patterns, floorboards, cork floors and OSB boards), wooden stairs and furniture. Particularly recommended for intensively used floors (restaurants, museums, shopping centers and other heavily visited public facilities).

Ingredients:
Based on natural plant oils and waxes (sunflower oil, soybean oil, thistle oil, carnauba wax and candelilla wax), paraffin, lead-free siccatives (drying agents) and water-repellent additives, dearomatized white spirit (benzene-free). VOC content in compliance with EU regulation (2004/42/EC): not applicable.

Storage:

Durability: 5 years and longer, if the can is hermetically sealed and stored in a dry place. Surface preparation: Wood surface must be clean, dry (moisture content max. 20%) and free from frost. Maintenance oil is ready to use, do not thin. Stir well before use!

Clean the surface thoroughly with the concentrate for cleaning of oil-waxed floors and rinse with clean water (using a damp mop).

Instructions for use:

Manually: For smaller areas, apply the Maintenance Oil thinly using a lint-free cloth and let the surface dry in a well-ventilated place.

Mechanically: Apply the maintenance oil using a putty knife or a short-haired roller and spread it carefully using a machine with a white pad. Remove excess product.

NOTE: The appearance of the coating depends on several factors, among other things, the condition of the wood. Therefore, a trial application is always recommended.

Cleaning of tools: Using a tool degreasing and cleaning agent (113, benzene-free). Drying time: approx. 3-4 hours (normal climatic conditions, 23°C/50% air humidity). Lower temperatures and/or higher air humidity can extend the drying time.

Caution: Keep out of children's reach. Do not let it get in your eyes, on skin, or on clothing. If medical advice is needed, have a product container or a label at hand. Use only outdoors or in a well-ventilated area. Dispose of the content/container to an authorized waste treatment facility (waste code number 08 01 11).

Note: Wash out any cloth impregnated with this product immediately after use or store it in an airtight metal container (self-ignition hazard). The coating after drying complies with the requirements of the German standard DIN 4102 B2 class (normal flammability). Safety data sheet available on request.


Facebook LinkedIn Twitter