Ash Cognac

Ash Cognac

Finished 2-layers plank measurements: 1200x140x14 mm finish: oil-waxed, bevelled on four sides

  • 354

Facebook LinkedIn Twitter

FertigDeska

Ash Cognac (thermo)

Ash board with a particularly dark, sophisticated color. Random grain arrangement and few knots provide it a refined and elegant character. Warm colors make it a unique proposition for advocates of classical beauty. This floor will find its use in representative and atmospheric rooms.


Acceptable pin knots, random fibres arrangement, very dark colouring (product after heat treatment – batches may vary in shade)

Products after thermal treatment are exposed to changes in colour under the influence of sunlight, and also change naturally to a lighter colour over time.


  • Types of finishes

  • 8 layers of durable varnish

    Varnishing: Finishing the floor with varnish accentuates the beauty of wood, adds gloss and protect the surface. It does not require maintenance, still giving the possibility to make occasional repairs.
  • 3 layers of oil-wax finish

    Oil-wax: Infiltrates the structure of wood, underlining its natural beauty and, at the same, preserving the floor. Requires more frequent maintenance, but enables to make spot renovations.
  • Brushing

    Involves brushing of the soft parts of grains in order to obtain small pits. Gives the effect of antiquating the floor.
  • Bevels V4

    Similarly as in the case of Bevels V2, it includes gentle cutting down the edges. However, in the V4 phase all the four edges, not only two of them, undergo the process of cutting. Optically emphasizes particular elements of the floor.
  • 30-years warranty

    The product is given 30-years warranty from the producer. Choosing the Jawor-Parkiet floors you choose the products of the highest quality
  • Floor heating

    The floor is prepared to be applied on floor heating.

  • Conventional

  • Brick

    Does not require any special preparation of the floor. Requires elements of equal length.
  • Oblique brick

    Does not require any special preparation of the floor. Requires elements of equal length.


  • Ash

    Technical parametres:

    Density: 720 kg/m3 

    Hardness:

    Janka: 76 MPa 

    Volumetric shrinkage:

    radial: 0.156

    tangential: 0,250

    The special properties of ash were noticed long time ago. The species is inseparably related to humans who learned how to use not only its hard and flexible wood, but also its bark and leaves to produce medicines. Occurs all around Europe, in the Crimea, the Caucasus and in Asia. It is a fast growing tree, reaches up to 25-35 m.  

    Ash wood creates an incredible color palette, starting from yellow-like and finishing at white-red. Sunlight in a natural way changes the shades of wood, thus white becomes yellow and the elements which are brown at the beginning become lighter after some time. The whole gains noble tone and the contrast between the colors decreases.  

    The wood pattern is very decorative – often striped, with clearly marked grains thanks to cells with good light scattered among the layer of early wood. Ash wood is hard, quite heavy, hardly fissile and flexible. It is also characterized by medium shrinkage or inclination to warping and cracking.


  • FertigDeska

    FertigDeska – a finished, two-ply floor with the same construction as FertigParkiet. The size of a particular plank constitutes the difference between those two products. Relatively large surface of the particular elements makes it a perfect solution for spacious interiors which become optically enlarged.


  • Floor dimensions

    FertigDeska 14 mm thick

                                                                                                                                                                                                                                                                                                                                                                       
    FertigDeska dimensions The number of slats amount per m2 use layer thickness The average weight
    width 70mm / length 490mm 48pcs. 1,646 m2 approx. 6mm 16kg
    width 63mm / length 480mm 48pcs. 1,452 m2 approx. 6mm 14kg

    FertigDeska 11 mm thick

                                                                                                                                                                                                                                                                                                                                                                       
    FertigDeska dimensions The number of slats amount per m2 use layer thickness The average weight
    width 70mm / length 490mm 60pcs. 2,058 m2 approx. 4mm 18kg
    width 63mm / length 480mm 60pcs. 1,814 m2 approx. 4mm 16kg

  • Pliki dla architektów / partnerów

  • Firma Jawor-Parkiet dla swoich partnerów przygotowała bazę materiałów do pobrania.

    W bazie materiałów znajdują się między innymi próbki w wysokiej rozdzielczości, tekstury dla naszych architektów oraz aranżacje z naszymi podłogami.

    Rejestracji można dokonać klikając tutaj

    logowanie

    Aby móc korzystać z udostępnionych przez nas materiałów, prosimy o zalogowanie się.